How To Measure Torque Converter Bolt Pattern. For example, the 10 converter in my race car measures around 10 5/8 at its largest point.the 8 coverter i ran in. Push the torque converter back into the transmission as far as it will go.
The trans i have for a 74 chev stepside c10, is a th400. When it comes to transmissions, no other company provides this level of commitment to their clients. Our t works out to.
T = 1,117.5 / 12.
In many ways, bayou city bolt is like the bolts we sell: I found out that you measure from one of the holes to the center of the converter and double it, but i don't know if you measure from the center, farthest side or closest side of the hole to the center, because you get different measurements in each spot. For example, the 10 converter in my race car measures around 10 5/8 at its largest point.the 8 coverter i ran in.
If You Are Installing Your Transmission That Was Purchased From Monster.
Push the torque converter back into the transmission as far as it will go. Determining the proper torque for a fastener is the biggest problem in fastener installation. For a 4 lug wheel, measure.
T =.2 X 3/4 X 28,747.
The minimum value of preload accounts for the preload. The dimension you are interested in is the bolt circle diameter. I got almost 5 1/2 from the middle which would be 11 inch but they only sell 10.5, 11.5 and 10 3/8 bolt pattern converters.
But If I Measure From The Closest Edge I Get 5 1/4, So It.
It was bolted to a 454. All in inches or all in millimetres. The trans i have for a 74 chev stepside c10, is a th400.
And Finally, The Torque Value For This Bolt Can Be.